Homepage
Become a Tutor
Fairy Meadow 
$25/h
This teacher is currently unavailable
Profile and Qualifications Verified
Response Time 24h
Lesson formats available..
  • One-to-one
  • Group Lessons
Lessons can be held..
  • At their place
  • at your place
  • by webcam
Subjects taught
  • Chemistry
  • Thermodynamics
  • Electrochemistry
  • Chemical Engineering
  • Industrial chemistry
Levels
  • All Levels

PhD Student at UOW gives tutoring to Chemical and Mechanical Engineering & Chemistry

Methodology

Myself a PhD student at ISEM, Innovation Campus Uni Wollongong. Basically I am a chemical engineer with Nanotechnology and materials related background .I am currently doing my research in Lithium ion batteries bit more focused on material science. But I can handle all subjects related to physical and chemical sciences even with basic mathematics.

Background

Had over 4 years of industrial experience in a chemical industry and 2 years of University teaching experience in tutoring Engineering and chemical science related topics. Also I previously did some part-time teaching in basic science subjects too during my bachelor degree. Also guided several bachelor projects and won several awards.

Rates

Rate for online lessons : $20/h
Rate for 5 hours of lessons : $100
Rate for 10 hours of lessons : $1500

Details

No

Lesson formats available..
One-to-one
Group Lessons
Lessons can be held..
At their place
at your place
via webcam
Subjects taught
  • Chemistry
  • Thermodynamics
  • Electrochemistry
  • Chemical Engineering
  • Industrial chemistry
Levels
  • All Levels

ANOOP's CV

Qualification

Master Degree in Operations Management
Master Degree in Nanotechnology & Material Science
Bachelors in Chemical Engineering

PROFESSIONAL EXPERIENCE

1. Ph.D Student( Enrolled on 11-07-2017)
Institute for Superconducting and Electronic Materials (ISEM)
School of School of Mechanical, Materials, Mechatronic and Biomedical Engineering
Innovation Campus, University of Wollongong

Thesis title: High-Energy-Density Positive Electrodes for Lithium-ion Batteries(Australian Research Council (ARC) Funded Project)

2. Assistant Professor
Dept. Of Chemical Engineering & Nanotechnology (July
2015-June 2017)
Amal Jyothi College of Engineering, Kanjirappally
Kottayam, Kerala, India


Courses Handled: -
Chemical Reaction Engineering
Chemical Process Calculations
Nano Technology for Energy Conversion and Storage
Industrial Nanotechnology
Introduction to Nanotechnology

Laboratory sessions Handled: -
Fluid Flow Operations Lab
Chemical Technology Lab
Reaction Engineering and Process Control Lab
Nanotechnology Lab

Research Specialization
Nanomaterials for energy storage, Electrochemistry and Corrosion
Funded projects
Lead removal Using Hydroxyapatite from Egg Shell –Funded by College
Other Responsibilities
Staff Coordinator of Entrepreneurship Development Cell- Staff Initiative (EDCSI)
Placement Cell (Department in Charge)
Departmental Website and Blog updates

3. Project Consultant (While working as Assistant Professor) (July 2015-June 2017)
Consulting works
(i) Consultant with English Indian Clays Limited Trivandrum (Sep 2015 to Dec 2015)
Worked as consultant for the project “Feasibility of converting sand from clay industry to foundry sand” and successfully conducted a Feasibility study at Amal Jyothi College of Engineering in collaboration with the Metallurgy department and handed over the results to the industry with in four months.

(ii) Consultant with Oushadhi (Pharmaceutical Corporation Kerala Ltd) (Dec 2016 to Feb 2017)
The objective of the study is to find out the reason behind the formation of suspensions one batch of their product ‘Dhanwantharam Thailam’ (a type of medicated oil). After a series of analysis, I was able to submit the results by February 2017. I had completed this work along with my colleague Dr.JoseVarghese Parambil.

(iii) Collaborative research program with Sewage Treatment Plant Muttathara, Thiruvananthapuram, Kerala maintained by Govt. of Kerala (Jul 2016 to Oct 2016)
Conducted a Study of settling characteristics of activated sludge and its correlation to rheological behavior and submitted my suggestions within four months.

(iv) Consultant for Erumeli Gramapanchayath Kudumbasree Unit and Entrepreneurship Development Cell of Amal Jyothi College of Engineering for the manufacture of various detergent chemicals (Jul 2016 to June 2017)
.

4. Engineer-Production (Dec 2011- July 2015)
Binani Zinc Limited, Binanipuram, Kochi, India

• Process monitoring and control of extraction process in leaching plant

• Improving the yield of cathodic deposition of Zinc in electrolytic plant.
• Analyze the performance of different ore types by conducting mineralogy studies.
• Ensure manufacture of products as per schedule with effective shop floor supervision.
• Worked in shift wise ensuring the continuous operation of the casting section with minimal downtime
• Supervising and controlling smelter operations
• Conduct technical orientation to new employees and technical support to the entire workforce in the working plant.
• To observe trends of process parameters using SPC and SQC tools & to take corrective actions for the deviations to maintain quality & production targets.
• Conduct die-casted metal quality analysis using Optical Emission Spectrometer.
• Managing production documentation in Oracle software module by creating Daily, weekly, monthly production report, ware house requisitions.

• Conduct or supervise tests on raw materials or finished products to ensure their quality.

• Investigate and modify properties of metal alloys, using thermal and mechanical treatments.

• Analyzing all process related problems using tools like RCA, PDCA etc.

• Internal Auditor for ISO 9001,14001, OHSAS, IMS and SA8000.

5. Graduate Engineer Trainee
Kerala State Pollution Control Board (Aug-2011 to Dec-2011)

• Examining and Validating the waste treatment methods adopted by the units and ETP Design
• Checking the adequacy of biomedical waste handling methods in hospitals and pollution control methods adopted in Industries
• Air sampling monitoring and controlling
• Checking adequacy of EIA reports of Industries
• Noise Measurement and analyzing in various zones
• Stack Monitoring and checking the emission rate of industries
• Design of effluent treatment plant and biogas plant for hotels, hospitals. etc.
• Analysis of water samples




PUBLCATIONS

• Anoop Somanathan Pillai, Ranjusha Rajagopalan, Amruthalakshmi V, Jickson Joseph, Amrutha Ajay, Imran Shakir, Shantikumar V Nair, Avinash Balakrishnan Mesoscopic architectures of Co(OH)2 spheres with an extended array of microporous threads as pseudocapacitor electrode materials (Colloids and Surfaces A: Physiochemical and
Engineering Aspects, 2015, 470, 280-289) *
• Amruthalakshmi V, Ranjusha R, Anoop S S, Jickson J, Amrutha A, Shantikumar V Nair, Deepak M. S, Avinash Balakrishnan Synergetic influence of ex-situ camphoric carbon nano-grafting on lithium titanates for lithium ion capacitors (Journal of Energy Chemistry, 2015, 24, 337-345)

• Jickson Joseph, Ranjusha Rajagopalan, S S Anoop, V Amruthalakshmi, Amrutha Ajay, Shantikumar V Nair, Avinash Balakrishnan Shape tailored Ni3(NO3)2(OH)4 nano-flakes simulating 3-D bouquet-like structures for supercapacitors: exploring the effect of electrolytes on stability and performance. (RSC Advances, 2014, 4, 39(concealed information))

• Amrutha Ajay, Anjali Paravannoor, Jickson Joseph, Amruthalakshmi V, Anoop S S, Shantikumar V Nair, Avinash Balakrishnan 2 D amorphous frameworks of NiMoO4 for supercapacitors: Defining the role of surface and bulk controlled diffusion processes (Applied Surface Science, 2015, 326, 39-47)


PROJECTS HANDLED

• “Revamping of Aluminium furnace in Alloy plant” (Binani Zinc Limited - January 2014 – June 2014)

The main objective of this project to improve the efficiency of Aluminium furnace in the Alloy plant which is used to melt the Aluminium ingots for Alloy production. Through this project, I could able to replace the existing furnace in the Alloy making process with a new one that showed very high efficiency and significantly reduced the operating cost.

• “Zinc recovery from the electrolyte sludge” (Binani Zinc Limited) (November 2012 – April 2013)

This project was aimed to recover the Zinc from the disposed electrolytic sludge. By this work I could able to propose and implement a cost effective recovery method and recovered Zinc worth 16 lakh rupees.

• "Study of settling characteristics of activated sludge and its correlation to rheological behavior” (Amal Jyothi College of Engineering) (July 2016 – October 2016)

This project is done as a part of a collaborative research program with Sewage Treatment Plant Muttathara, Thiruvananthapuram, Kerala maintained by Govt. of Kerala. The main objective was to study about the settling characteristics and rheological behavior of activated sludge and to propose different methods to enhance the sewage treatment plant efficiency.
• “Conversion of waste plastic to transport grade fuel” (Amal Jyothi College of Engineering) (Jan 2016 – present)

I had guided a team of four students to successfully develop a complete working model that converts the waste plastic directly into transport grade fuel. Further modifications and developments are under process. This project had won several prize as various competitions held at IIT Madras, IIT Guwahati, IIT Bombay and first prize of Manorama-Online Big Business idea contest organized by Malayala Manorama and South Indian Bank.

• “Mesoscopic architectures of Co(OH)2 spheres with an extended array of microporous threads as pseudo capacitor electrode materials” (Amrita Centre for Nanosciences and Molecular medicine) (Jul–2014 - Sep 2014)

Through this work I had synthesized α-cobalt hydroxide comprising of randomly arrayed nano strands in a three dimensional plane and shown high capacitance, surface area, cycling stability, low self-discharge, high rate capability which make them as a promising supercapacitor electrode material. This project work was done during my Master’s degree program and this work was published in an international journal.

• “Design of Heptane Column in Anone Plant” (Fertilizers and Chemicals Travancore –Udyogamandal Division) (Nov 2010 -Jan 2011)

This project was done as a part of my Bachelor degree program where I had suggested a new design for the heptane column which maximize the removal of heavier fractions from the cyclohexane which is the product of Anone plant and raw material for the production of Caprolactum.

ACHIEVEMENTS AND SKILLS

• Lean manufacturing; Six Sigma, Kaizen, PDCA, Root Cause Analysis, 5S, Total Productive Maintenance(TPM), Control charts, Total Quality Management (TQM).
• Shop floor management.
• Selected as the best performer in the Quality Circle competition in Binani Zinc Limited.
• Expertise in Using MS Office tools, C++ and Java, basic knowledge and experience in PLC and SCADA operations.
• Coordinator of Entrepreneurship development cell- Staff initiative of department of Chemical Engineering where successfully formulated and manufactured new cleaning chemicals, products such as toilet cleaner, floor cleaner, fabric whitener, detergents etc. and successfully marketed to the entire college and its subsidiaries.

COURSES ATTENDED
• ” Introduction to Refining Process” at Bharat Petroleum Corporation Kochi Refinery Oct- 2009 to Mar-2010
• “Behavior Based Safety” two-day certification programme at Binani Zinc Ltd from 10/12/2012 to 11/12/2012.
• ‘IOSH Managing Safely’ November 2012 –at Universal Safety Services Pvt limited
• Two week ‘Advanced Fire Fighting Training associated with the six-month training course at Bharath Petroleum Corporation Kochi Refinery.
• Certificate course in Oil and Gas Safety Management by Scientific & Technical Education Development Council of India from 05/09/2012 to 06/10/2012.
• Internal Safety Auditor IS 14489:1998 training at Binani Zinc Ltd 21/01/13to 22/01/2013
• HAZOP & Risk assessment Conducted by BPCL Kochi Refinery Training Centre associated with the six-month training course at Bharat Petroleum Corporation Kochi Refinery.
• 3 weeks Statutory Certificate Course in "Safety & Health for Supervisory personnel working in Hazardous Process Industries" Conducted by (DGFASLI) Under Ministry of Labour-Govt of India at Fertilizers and Chemicals Travancore, Kochi from 07/05/2013 to 28/05/2013.
• NEBOSH International General Certificate in Occupational Health and Safety from 08/10/2012 to 09/11/2012
• One-week Short Term Training Programme on “Nanotechnology” at Government Engineering College Idukki from 14/12/2015 to 18/12/2015
• National Level 3 Day Staff Development Programme on Research Opportunities and Challenges in Advanced Materials and Manufacturing from 8 to 10 June 2016.
• National Programme on Technology. Enhanced learning at Amal Jyothi College of Engineering sponsored by IIT Madras, 1 day on 21-11- 2015.
• Learning Environments with Apple for education by Apple tech. on 09-12- 2015.
• Organized a demonstration program on waste treatment systems sponsored by Kerala State Council for Science Technology and Environment as part of National Technology Day celebration at Amal Jyothi college of Engineering on 11/05/2016.
• Organized an Entrepreneurship Development Programme for Kudumbasree unit of Erumeli Gramma Panchayat on 15/03/2016.
• Two day workshop on ‘Research Methodology, writing practices, language and soft skills’ hosted by Centre for Continuing Education(CCE) Amal Jyothi College of Engineering in coordination with Women Scientists Division(WSD) of The Kerala State Council for Science, Technology and Environment (KSCSTE) and Indian Society for Technical Education (ISTE) Kerala Section from 03/04/2017 to 04/04/2017.

MEMBERSHIP, AWARDS & CERTIFICATIONS

• Certified for National Examination Board in Occupational Safety and Health (NEBOSH) (United Kingdom).
• Life Associate Member of Indian Institute of Chemical Engineers(IIChE) Membership No: LAM-60078
• Associate Member of The Institution of Engineers of India (IEI),Membership No: AM1718811.

• Certified for Institution of Occupational Safety and Health (IOSH) (USA).

• Recipient of Scientific & Technical Education Development Council (STED Council). award of Oil and Gas Safety Management.

• Internal Safety Auditor IS 14489:1998

Similar tutors

chemistry lessons nearby? Here's a selection of other listings you can check out.
Superprof can also help you with thermodynamics lessons.
Not quite what you're after? How about electrochemistry lessons?
Taking chemical engineering lessons has never been easier!

Fairy Meadow
Wollongong Uni Engineering student with strong Physics background gives Physics lessons and inspiration within Illawarra region
$33
Thao
  • (1 review)
1st lesson free!

My teaching method is to encourage students' creativity, inspire them with the importance of Physics and its close...

Lessons via webcam Face to face lessons Approved profile
North Wollongong
Recent University of Wollongong Chemistry Graduate gives lessons in all areas of chemistry to all educational levels (k-6, high school, university)
$20
Alayna
1st lesson free!

I let my students tell me what areas they need improving and observe areas of improvement by asking the student how they...

Lessons via webcam Face to face lessons Approved profile
Fairy Meadow
General chemistry, Organic chemistry, Physical chemistry, Applied chemistry, Reaction mechanisms, Structures, Nomenclature and Experimental procedures etc. of school, college and university level can
$18
Muhammad
1st lesson free!

My method of teaching is to elaborate the topic/article and explain various aspects of the topic, discuss abnormal...

Lessons via webcam Face to face lessons Approved profile
North Wollongong
UOW Science Education (Chemistry) student offers help to Primary & Secondary students in Science and Maths
$25
Matthew
1st lesson free!

My tutoring sessions are student led, where the student dictates what they would like to learn, revise, or revisit. I...

Lessons via webcam Face to face lessons Approved profile
Keiraville
UOW Materials Engineering student offering comprehensive Physics classes to High school students
$30
Eleftheria
  • (2 reviews)
1st lesson free!

I approach a topic by seeing how each individual student learns and tailoring the experience to them. I believe that...

Face to face lessons Approved profile
Fairy Meadow
Geology student at the University of Wollongong I also work as an Intern at the Wollongong Science Space where I interact with primary and secondary students on a daily basis. I can teach all science
$32
Brenda
1st lesson free!

My teaching method focuses on the student teaching me about a particular topic or formula. I believe that if the student is...

Lessons via webcam Face to face lessons Approved profile
North Wollongong
Do you want to ace in Chemistry? If yes then I have got a FORMULA for you carefully designed with all essential INGREDIENTS to be successful in your CHEMISTRY venture!!
$25
Muhammad
1st lesson free!

My approach is to strengthen the student's foundation first which means emphasizing and working on the concepts first then...

Lessons via webcam Face to face lessons Approved profile
Keiraville
Ayesha yousaf gives Chemistrt lectures to high school students and college students . Experienced for 5 years at college level .
$25
Ayesha
1st lesson free!

My teaching method is concept based i deliver lectures and perform some experiments if needed moreover tests are main part...

Lessons via webcam Face to face lessons Approved profile
Gwynneville
Indian student from the University of Wollongong gives Mathematics classes to primary and middle school students.
$15
Zaina
  • (1 review)
1st lesson free!

I've been teaching through Zoom since the lockdown, however, I prefer one on one classes. I believe in the clarification of...

Lessons via webcam Face to face lessons Approved profile
Keiraville
Master of Engineering student gives classes for Chemistry for High school students
$21
Tary
1st lesson free!

I generally try to understand the basic level of the student and work accordingly. Usually , I start with the basics and...

Lessons via webcam Face to face lessons Approved profile
Wollongong
Wollongong University Medical Student and Qualified Secondary School Teacher Specialising in Science
$25
Jethro
1st lesson free!

My teaching philosophy focuses on leadership and engagement. I believe an effective teacher is a great leader who is open...

Lessons via webcam Face to face lessons Approved profile
Wollongong
I am a Master of Engineering student who's great with mathematics at high school level as well as uni level
$23
Dinesh
1st lesson free!

I like to believe that basics is the key to success. If a person's base is strong then he/she can reach great heights. I aim...

Lessons via webcam Face to face lessons Approved profile Responds within the hour
Gwynneville
Your reliable tutor (Math, Science, etc. )for students needing extra academic help and attention
$30
Arun
1st lesson free!

1. Thorough conversation with the student and investigating notes to identify the gaps in classroom delivery. 2. A book is...

Lessons via webcam Face to face lessons Approved profile Responds within the hour
West Wollongong
Wollongong chemistry student available for science lessons in both Wollongong and Sydney
$25
Ben
1st lesson free!

I approach teaching by first identifying peoples weaknesses and strengths in a subject. Then I prefer to teach by...

Lessons via webcam Face to face lessons Approved profile Responds within the hour
at their place at your place by webcam
1 hour $25 $25 $20
5 hours $100 $100 $100
10 hours $1500 $1500 $200
This teacher is currently unavailable